iPhone 14 Pro and iPhone 14 Pro Max Schematics Reveal Larger Camera Bump and Thicker Overall Design

A new leak shows that Apple's upcoming high-end iPhones could feature a more prominent camerabump and a thicker overall.

The basic schematic for the ‌iPhone 14 Pro; was shared last week, but the ones shared by Weinbach are more detailed and offer more information about the upcoming phones. According to the schematic, the width of the iPhone 14 Pro is 77.58mm, which is slightly smaller than the width of the iPhone 13 Pro Max. According to the schematic, the Max will be nearly identical to the 13 Pro.

The current high-end iPhone measures just 7.65mm in thickness, but the ‌iPhone 14 Pro‌ Max will measure 7.85mm. The size of the camera on the back has been increased by Apple with the scuplture of the scuplture of the scuplture of the scuplture of the scuplture of the scuplture of the Apple is looking to repeat a trend.

According to guidelines created by Apple for accessory makers to follow, the current camerabump on the iPhone 13 Pro is just 3.60mm tall. The camerabump on the high-end ‌iPhone‌ will be 4.17mm thick. The camera will increase in size by 5% in each of the dimensions, going from a current width of 35.01mm to 36.73mm.

Weinbach also shared the schematic for the smaller phone. According to those schematic, the iPhone 14 Pro is almost identical to the iPhone 13 Pro in width at just 71.45mm. The height of the ‌iPhone 14 Pro‌ will be the same as that of the ‌iPhone 13 Pro‌. The camera bump on the iPhone 14 Pro will be 4.17mm compared to the current 3.60mm.

Jon Prosser, the leaker, shared initial renders that showed a design with no camerabump, but instead showed a lens. Prosser's renders had circular volume buttons.

According to the schematic shared by Weinbach and last week by 91Mobiles, neither of the design elements will come true. Rumors should be taken with a grain of salt, as Apple's plans can always change.

Jon Prosser shared a leaker's renders of the iPhone 14 Pro.

There are still rumors about the lineup of the phone, but it is believed that Apple will remove the notch on the high-end phones in favor of a pill-shaped and circular cutout.

There were rumors that the scuplture would feature a pill-shaped intrusion at the top of the display. There are rumors that Apple is planning a pill-shaped and circular cutout at the top of the display. According to rumors, the two cutouts will not be centered with the display but off- axis.

The two lower-end iPhone 14 Pro and iPhone 14 Pro have a pill-shaped and circular cutout. Current information suggests that Apple is trying to differentiate its lower-end models from its higher-end ones.

They could be the only ones to get improved performance after giving the high-end variant a new front display design. The A16 chip will only be available in the iPhone 14 Pro and iPhone 14 Pro Max, while the two remaining models will retain the A15 chip.

We are expecting a wide array of camera improvements across the entire lineup, along with the possibility of a new titanium case option, a possible vapor chamber thermal system on the high-end models, and more. For a complete and comprehensive rundown of all the rumors, see our roundup.